- Cooling System[4]
- Engine Mounts[2]
- Car Polishers[2]
- Spray Booths[10]
- Car Washer[4]
- Body Repair Equipment[10]
- Car Lifts[10]
- Other Vehicle Equipment[10]
- Tire Changers[4]
- Wheel Alignment[10]
- Car Jacks[10]
- Diagnostic Tools[10]
- Tire Inflators[5]
- Tire Repair Tools[3]
- Scanners[9]
- Diesel Generators[10]
- Gasoline Generators[10]
- Steam Cleaners[3]
- Ultraviolet Lamps[4]
- Air-Compressors[10]
- Drying Equipment[1]
- Cleaning Equipment[10]
- Boring Machine[10]
- Lathe[10]
- Welding Torches[7]
- Gas Analyzers[10]
- Testing Equipment[10]
- Pliers[6]
- Jacks[1]
- Hydraulic Tools[2]
- Pneumatic Tools[7]
- Tool Cabinet[1]
- Tool Case[1]
NHD-8000 Headlight Tester
Product Detailed
1.Measure light intensity of high beam.
2.Manual measure the height of headlight.
3.Power Supply:1unit of DC9V
General Features:
Measure light intensity of high beam.Manually observe the central deviation of the iptical axis of headlight.Manually observe the relative position of the turning point of the cut-off light of low beamManual measure the height of headlight.Main Technical Specifications:
Measuring Range
Central Height of Headlight | 50cm~130cm | |
Light Intensity | 0 ~ 60,000cd (standard) | |
0~ 120,000cd (maximum) | ||
Resolution | Light Intensity of High Beam: ±100cd | |
Indication Error | Light Intensity of High Beam:±12% | |
Measuring Distance | 30~50cm | |
Power Consumption: | <0.5W(for complete machine) | |
Dimension | 590mm(W) × 1810mm(H) × 590mm(D) | |
Net Weight | 30kg | |
Operation Condition
| Environmental Temperature | 5~40°C |
Relative Humidity: | Less than 95% | |
Atmosphere Pressure: | 70.0~106.0KPa | |
Power Supply: | 1unit of DC9V(Cigar Lighter or Storage Battery can be used ) If AC power is used ,an inverter should be applied | |
Ground
| The Headlight Aimer and the car should be on the same ground . the horizontal error of the ground should not be more than1% | |
Other products
